Innovators in MOTION CONTROL
Hydraulic • Pneumatic • Electro Mechanical
Sprague Products
Hansen Quick Couplers High Pressure Hydraulic
Rotary Actuators, Slides, Grippers, Electric Actuators Schrader Bellows Cylinders
Your Fluid Power Supplier Vacuum Fittings
Your Fluid Power Supplier fluid power automation
Continental Hydraulics
Hydraulic and Pneumatic Products Hydraulic Cylinders
Hydraulic Power Units
Free catalogs by mail Parker Pneumatics
Petcocks, Needle Valves, Plug Valves
Services custom  tailored to fit your needs Aeroquip Hydraulic And Pneumatic Hose
Monarch Power Units
New Monthly Products Schrader Bellows
Hydraulic Pumps
Schrader Bellows FRL Pneumatic Units
Call, fax  email or drop in and visit Pneumatic Cylinders
Print out a credit application Rodless Cylinders
Stainless Steel Fittings
Vacuum Fittings
Formulas, charts, etc. Mac Valve, SMC, Rexroth, Vickers, Bosch
Other related sites Schrader  Bellows Accumulators
Bucher Hydraulics / Monarch Hydraulics Pumps
Kawasaki Hydraulic Motors Parker Gold Ring Valves

How the J-pump works

How the pump works

The Sprague Products pump develops high output pressures by applying the principle of differential areas. The pump has a large area air piston, air-driven at low pressures. This air piston drives a small area liquid piston that in turn pumps liquids at high pressures.

The liquid output pressure is determined by the ratio between the area of the air drive piston, the area of the liquid driven piston and the applied operating air pressure.

The area relationship of the air piston to the liquid piston is referred to as the pump ratio. This pump ratio is indicated in the dash number which follows the pump model basic number:

Example:
S-216-J-10 pump has an approximate ratio of 10 to 1 or 10 psi liquid pressure for each 1 psi of operating air pressure.

J PumpIn operation, an #-216-J-10 pump using 100 psi of input air pressure will produce a maximum liquid output pressure of 1000 psi; 80 psi air will produce an output pressure of 800 psi; 60 psi air…600 psi output, and 40 psi air…400 psi output.

By regulating the incoming air supply at the pressure regulator, the liquid output can be infinitely adjusted through the pump's pressure range.

Wetted section materials

The materials used in the wetted section of the Sprague Products basic pump are compatible to most liquids to be serviced. Pump components and materials included:

Liquid Body
303 Stainless steel
Liquid (driven) Piston
416 Stainless steel chrome plated
Piston O-ring
Nitrile
Piston Back-up Ring
Teflon or equivalent compound
Check Valve Body
416 Stainless steel
Check Valve Poppet
17-4ph Stainless steel
Check Valve Spring
302 Stainless steel
Check Valve Seal
Nitrile

 

Accessories

J Pump Accessories

For optimum efficiency, certain accessories are recommended for use with pump. Noise can be dampened by installing muffler at pump's air exhaust port. For "J" type lubricated pumps and boosters, install an air control unit (filter, pressure regulator with air gauge and lubricator) in the supply line. For "JN" type non-lubricated pumps and boosters, install an air control unit (without lubricator) in the air supply line. These and other related accessory items are available from Flow Products, Inc. at 800-631-2029 .

 
Home | About us | Products | Catalogs | Services | What's NEW | Contact Us | Technical Info | Links | Site map
Milwaukee Cylinders
Copyright © 1999, FLOW PRODUCTS, Incorporated. All Rights Reserved. Terms and Conditions
800-631-2029  •  FAX (773) 528-6474
sales2@flowprod.com


gWebsolutions.com
 designed and hosted